Abrasive Cut-Off Saw (31849) Due 3/07/2024

•  Voltage: 230–240Vac ~ 50Hz
•  Input power: 2200W  
• No load speed: 3750min-1 
• Disc diameter: 355mm 
• Flange diameter: 120mm  
• Disc bore size: 25.4mm
• Pipe: 100mm*
• Box Section: 90mm square*
• Rectangular Steel Tubing: 60 x 200mm*
• Angle Iron: 130mm*
• Solid Steel Bar: 35mm*  
• Insulation: Double insulated

*Cutting capacities are based on using a full size 355mm cutting disc that is not worn. As the disc wears the cutting capacity will reduce. 

The cut off saw is used for cutting steel such as pipe, box section, rectangular, angle iron and steel bars. The saw can cut at angles from 0° to 45° left and right, it features a two position fence that permits an extended cutting range. The quick release vice allows fast adjustment whilst the lock-off button prevents accidental operation.