Battery Random Orbital Sander (31471) Due 6/07/2024

Sanding pads are not included and can be purchased separately.

Parts:

1. 125 mm (5") Cordless Random Orbital Sander Variable Speed
2. Dust collector
3. DC18SD Battery charger
4. 3.0Ah 18V Li-Ion Battery
5. Paper Manual
6. Box

Warning: Do not store tool/battery where temperatures may exceed 50C (e.g. car)

To maintain battery life: Fully charge battery before it is completely discharged, and don't charge when it's already charged.
To remove battery:

• Hold the tool and the battery cartridge firmly when installing or removing battery cartridge.
• Failure to hold the tool and the battery cartridge firmly may cause them to slip off your hands and result in damage to the tool and battery cartridge and a personal injury.
• Remove battery cartridge: slide it from the tool while sliding the button on the front of the cartridge.

To Install battery cartridge:

• Align the tongue on the battery cartridge with the groove in the housing and slip it into place. Insert it all the way until it locks in place with a little click. If you can see the red indicator on the upper side of the button, it is not locked completely. 

Features:

• Push button control with on/off and high/medium/low speeds
• High orbital speed up to 11,000opm with 2.8mm orbit diameter
• Pad brake prevents aggressive sanding on first contact
• Hook & loop paper fastening system

Specifications:

• Abrasive paper diameter: 125mm
• Orbit diameter: 2.8mm
• Orbits per Minute: 7,000 / 9,500 / 11,000opm
• Overall Length: 175mm
• Pad diameter: 123mm
• Sanding Strokes: 14,000 / 19,000 / 22,000spm
• Skin weight: 1.1kg
• Voltage: 18V
• Weight (with battery): 1.7kg
  

Manual - check attached file. Can also be found at https://www.makita.com.au/images/downloads/documents/manuals/DBO180Z_manual.pdf

Exploded Parts Diagram:  https://www.makita.com.au/images/downloads/documents/diagrams/DBO180Z_diagram.pdf

Safety: use safety glasses