Wheel Truing Stand (30987) Available now

TRANSPORT CAREFULLY or it will get out of alignment. Thanks

Features:
Accepts wheels from 16" to 28" with or without tire removed. Both axle-holding uprights move simultaneously, always centering wheel hub with calipers, regardless of hub width. Calipers and caliper arm are spring-loaded to prevent jamming with badly out-of-true wheels. Made of heavy chrome plated steel with nylon bushings at pivot points. Can be bench-mounted or vise-held. The standard of the industry. If a forward or backward tilt is desired, use with Truing Stand Tilting Base (TSB-2) shown below. For precision work, the TS-2 should be used with the WAG-4 Professional Wheel Alignment Gauge. Opens up to accept hubs 150mm wide.

Article-How to True a Wheel: https://www.parktool.com/blog/repair-help/wheel-and-rim-truing

Product Page: https://www.parktool.com/product/professional-wheel-truing-stand-ts-2

Video-How to Center/Calibrate: https://www.youtube.com/watch?v=FzPdbRXAaGY

Video-Review: https://www.youtube.com/watch?v=uPcssutRcNc

Article-How to Center/Calibrate: https://www.parktool.com/blog/repair-help/ts-2-2-and-ts-2-centering

https://www.youtube.com/watch?v=OhSZKGJliwA

Last calibrated: 31/10/22

Note: if this is out of alignment you just do one side at a time and don't worry if the truing stand is perfectly aligned. It's easy to take the wheel out and flip it around.